Envirolite Midamax 200

Envirolite Midamax 200

ATER-BASED ZERO VOC & REDUCED VOC PAINT

All Midas Paints at Midas Paints Tygervalley are rated by our Green Filter to give you a clear indication of the VOC (Volatile Organic Compounds) and other chemical content. We believe in being transparent and we want to give you healthier, more ethical choices.

Envirolite Midamax 200 – Matt Acrylic Paint Exterior Primer & Interior topcoat

Exterior & interior low sheen satin topcoat – stain resistant, scrubbable and washable. Top-selling Midas acrylic paint.  Our Envirolite core range of water-based acrylic is graded by number – so sheen levels, washability and durability all increase up the scale.

Midamax 200 Product Description:

An environmentally friendly, easy to apply, good quality Matt Acrylic emulsion for use as an interior/exterior finishing coat or interior primer. Midamax 200 offers excellent hiding power and has good grain filling properties. The product conforms to GBCSA environmental requirements and EU 2010 targets. Envirolite Midamax 200 has been formulated to offer excellent hiding power and washability and is suitable for use as a luxurious interior coating or a durable exterior coating. The product conforms to GBCSA environmental requirements and EU 2010 targets.

Envirolite Midamax 200

Envirolite Midamax 200

Benefits of Midamax 200

Interiors & exteriors
Interior Topcoat or primer paint
Exterior primer paint
Not available in deep colours
Wipeable

Area of Use of Midas 200

INTERIOR and EXTERIOR surfaces. Midamax 200 used as interior primer for new or previously painted sand/cement plaster, concrete, fairfaced brickwork, gypsum boards (suitably primed when new) and building boards. Envirolite Midamax 200 is used as an economical finishing coat for interiors and ceilings, as well as asbestos and fibre cement.
NOTE: Refer to the occupational health & safety act 1993 (ACT NO.85 of 1993) ASBESTOS REGULATIONS, 2001; for working with asbestos fibre products.
NOT RECOMMENDED for areas of high traffic or humidity.

Application of Envirolite Midamax 200

PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation contact Midas Paints Tygervalley StoreAfter the correct surface preparation has been completed apply the necessary primer coat. Then thoroughly stir and apply a minimum of 2 coats of Midamax 200 to prepared surfaces using a brush, roller or spray at the stipulated spread rates.

IMPORTANT: Walls (cement plaster, concrete or masonry) must be dry before painting and should not exceed a moisture content of 10% as measured with a Midas Paints Tygervalley Moisture Meter or equal.
The ambient temperature must not be below 10ºC and not higher than 35ºC. |
Humidity must not be below 10% and not higher than 85%.
· Excessive application thickness and/or rapid drying could lead to mud cracking.
· Always keep a wet edge and avoid downing tools during the application process to prevent lap marks and variances in colour or texture. Work from corner to corner, or from a natural cut off point to another.
Do not attempt touch ups, but redo complete panels.

Downloads:
Envirolite Midamax 200 Technical Data Sheet
Envirolite Midamax 200 Safety Data Sheet

Related Products:
Envirolite Midalux 240
Envirolite Midalux 230
Envirolite Midafelt 220
Envirolite Midamax 190

Pin It on Pinterest

Share This