Envirolite Midafelt 220

Envirolite Midafelt 220

ATER-BASED ZERO VOC & REDUCED VOC PAINT

All Midas Paints at Midas Paints Tygervalley are rated by our Green Filter to give you a clear indication of the VOC (Volatile Organic Compounds) and other chemical content. We believe in being transparent and we want to give you healthier, more ethical choices.

Envirolite Midafelt 220 – Matt Acrylic Wall Paint.

Matt acrylic paint with unequalled hiding power – interior and exterior topcoat. Our Envirolite core range of water-based acrylic is graded by number – so sheen levels, washability and durability all increase up the scale.

Midafelt 220 Product Description:

An environmentally friendly, easy to apply, superior quality Acrylic Emulsion for use as an interior/exterior finishing coat. With excellent durability and low in odour, it offers superior hiding power and excellent spreadablity. It is easy to clean with good scrubability.

Benefits of Midafelt 220

Interiors & exteriors
Topcoat
Available in all Midas 300 colours
Excellent spreadability

Area of Use of Midas 220 Matt Acrylic Wall Paint

RECOMMENDED FOR INTERIOR and EXTERIOR surfaces.
Suitable for direct application onto new cement plaster, concrete, porous brickwork and various types of building boards.
May also be applied to suitably primed wood, metals, fibre cement and gypsum plaster.
NOT RECOMMENDED for areas of high traffic or humidity, or for areas where chemical resistance is required.

Application of Envirolite Midafelt 220

RECOMMENDED FOR INTERIOR and EXTERIOR surfaces. Suitable for direct application onto new cement plaster, concrete, porous brickwork and various types of building boards. Matt Acrylic Paint. May also be applied to suitably primed wood, metals, fibre cement and gypsum plaster.
NOT RECOMMENDED FOR Not suitable for areas of high traffic or humidity, or for areas where chemical resistance is required. APPLICATION PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation contact Midas Paints Tygervalley Store.
After the correct surface preparation has been completed apply the necessary primer coat. Then thoroughly stir and apply a minimum of 2 coats of Midafelt 220 (White or Tint base) to prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow to dry before over-coating.

Downloads:
Midafelt 220 Product Data Sheet
Midafelt 220 Technical Data Sheet

Related Products:
Envirolite Midalux 240
Envirolite Midalux 230
Envirolite Midamax 200
Envirolite Midamax 190

Pin It on Pinterest

Share This